-> Overview -> [Disassemble] -> [Adjustment] -> [Reassemble]

Here is an exploded view of a Revolution Truck showing its key componants, The Endcap, Seal, Axle, Guide and Main Body.

This how your truck should apear if they have been set up on the board corectly, the angle the trucks are set up is up to the rider but the golden rule is that the slot that the axles run in points up and in and down and out as shown in the pic

On the left is the Truck Hole Pattern, use a 6mm drill bit for your holes.

Content copyright © 2008 DesignExtreme. All rights reserved